The Whirlwind WFFD12X1KIT and WFFD12X2.5KIT are flush mount, hinged door assemblies that attach to a 12”x 12” NEMA Type 1 box. These units provide an attractive, locking door for Whirlwind wall frames that recess connector panels inside the backbox. Two recess depths are available: 1” and 2.5”. A blank connector mounting plate (part# WFI12X12) is included with the complete assembly. Whirlwind can also punch, load and engrave panels that fit into the wall frame enclosure, ready to wire and install, for contractor convenience. The outside dimension of the door bezel is 14”x14”. MODEL # WFFD12X1KIT for 1” recess behind doorMODEL # WFFD12X2.5KIT for 2.5” recess behind door SELECT BACKBOX DEPTH TO ALLOW FOR SUFFICIENT CLEARANCE BEHIND CONNECTOR PANEL
