Whirlwind FP-3 and FP-4 units feature removable bottom and end panel(s) to facilitate custom punching and engraving. (The FP-3 has one interchangeable panel on one end, the FP-4 provides panels on both ends.
Whirlwind FP-3 and FP-4 units feature removable bottom and end panel(s) to facilitate custom punching and engraving. (The FP-3 has one interchangeable panel on one end, the FP-4 provides panels on both ends.
Cable-clearance slots in the doors allow it to close over cables when in use and the FP-4 features a second separate hinged section that can remain open if the pocket is used with large diameter cable.
Both the FP-3 and FP-4 are deep enough to contain multipin connectors including Whirlwind's MASS series.
Check out our custom shop feature showing the FP-4 wired.
Nominal Outside Dimensions:
FP-3:
Box: 10" x 10" x 4.5"
Lid: 12" x 12"
FP-4:
Box: 18" x 10" x 4.75"
Lid: 20" x 12"
Optional back boxes are available:
FP-3BB6 - for FP-3 10" x 10" x 6" deep
FP-3BB8 - for FP-3 10" x 10" x 8" deep
FP-4BB8 - for FP-4 18" x 10" x 8" deep
* Back box knockouts include .5", .75", and 1"
