LMPRE

The Whirlwind LMPRE is a convenient single channel microphone preamplifier with tone controls and a built in peak limiter. Use it anywhere mic level to line level conversion is required....

HB1XL

The HB1XL is a professional quality, passive headphone monitor box.

• Type: Passive

LM2U and LM2B

These handy boxes can be used to match consumer grade audio devices (-10dB) to pro equipment (+4dB). These units convert the level and provide the conversion from balanced...

ISO-2 DUAL LINE LEVEL ISOLATOR and BALANCER

The ISO-2 is a two channel isolation box and line balancer. As an isolation unit, use it to isolate lines to press and video feeds or on-stage power amps. It's a handy hum and...

ISO-8 Line Level Isolator and Balancer

Sometimes a ground lift isn't enough to do the job. The ISO-8 is a valuable part of systems where different pieces of gear are connected across long lines.

IMP PAD

Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads.

PHASE REVERSE

The phase reverse offers a temporary solution to fix a miswired mic or cable. This female-to-male XLR 3-pin inline device reverses the connection of Pins 2 and 3 between...

LIFTER

Ideal for troubleshooting ground problems, this female-to-male XLR 3-pin inline device disconnects pin 1 between the connectors. It isolates the ground of a balanced...

LITTLE IMP

Some mixers have 1/4", unbalanced inputs designed for high impedance mics and won't accept standard balanced, low impedance microphones.

AES/EBU DIGITAL AUDIO ADAPTERS

The Canare BCJ-XJ-TRB (XLR-F to BNC) and BCJ-XP-TRB (XLR-M to BNC) adapters are a cost-effective solution for long cable runs over coaxial cable as opposed to the...